・If you use an inappropriate power supply for the product, environmental noise may affect the effector and cause noise or malfunction.
Please use a power supply/adapter for effectors (DC9V, center minus 2.1mm) or a 9V battery.
Even if the voltage is correct, using an AC adapter that is not designed for effectors may cause a malfunction.
・Please make sure that the total current consumption of the effector to be used does not exceed the amount of current that the power supply can supply.
・When not using the effector, unplug it from the INPUT jack. This will help reduce the drain on the battery.
To prevent the battery from leaking, remove the battery if you will not be using it for a while.
・If you are using a battery-powered product, the battery snap is pre-covered.
Be sure to keep the cover in place when using the batteries, and install the cover when removing the batteries for use.
・Please read the instructions carefully and use the product in the correct way.
If you suspect that the product is malfunctioning, please refer to the FAQ page first.
If the problem persists, please refer to the repair request page or contact your dealer for repair.